Skip to content

Dash cams · Parking mode setup

VIOFO A329S parking mode: HK4 vs HK6, wiring and the settings that matter

Most dents happen while nobody's in the car. That's exactly when a new A329S plugged into the lighter socket goes dark. Parking mode needs a hardwire kit, VIOFO sells two that fit, and they don't unlock the same features. Pick wrong and you either lose the best mode or wake up to a flat battery.

By Adam Anderson, Editor and CEO, Gearsentials

This article contains paid Amazon links. Gearsentials may earn a commission from qualifying purchases. Affiliate standards.

Researched buying guide

Reviewed

How we choose

The dash cam in this guide

Paid links. Gearsentials may earn a commission from purchases.

Diagram of VIOFO hardwire kit wiring and which A329S parking modes work with the HK4 or need the HK6
Source: Gearsentials and VIOFO.

What's missing from the box

The A329S has parking modes built in. What it doesn't have is a way to get power once you turn the car off. VIOFO's A329S FAQ says you use the HK4 or HK6 hardwire kit to turn on automatic parking mode, and VIOFO's Amazon listing notes the kit isn't included. The Smart Home Hookup found the same thing in its 13-camera test: a polarizing filter in the box, but no SD card and no hardwire kit.

The kit does two jobs. One wire keeps the camera powered with the engine off. The other tells the camera when the engine stops, so it can switch into parking mode on its own. VIOFO's parking mode explainer says there's no button for this. Pick a mode in the menu once, and the camera flips back to normal recording when you start the car.

HK4 vs HK6: what each kit unlocks

Both kits power the A329S. The HK6 is the one built around it. Its extra trick is that it reads the car battery's voltage and sends that number to the camera. VIOFO's HK6 page says that lets it switch modes based on real battery voltage, not just a fixed timer.

A329S parking features by hardwire kit
FeatureHK4HK6
Auto event detection, time-lapse, low bitrateYesYes
Low power impact detectionYes, per VIOFO and BlackboxMyCarYes
Hybrid parking (switches modes as the battery drops)NoYes
Cut-off voltage setting in the cameraNoYes
Low-voltage switch on the kitYesYes
Battery voltage sent to the cameraNoYes

The FAQ says you need the HK6 to use the Cut-off Voltage feature, and that both kits have low-voltage protection. BlackboxMyCar fills in the rest: the HK4 still works with the A329S, including low power impact detection, but you lose hybrid parking and the voltage readout. With an HK4, battery protection comes from the camera's parking timer and the kit's own switch.

One warning about shopping. Some retailer charts, like this HK4 vs HK6 comparison, list the HK4 for older models only and put the A329S in the HK6 column. VIOFO's own FAQ names both kits, so an HK4 you already own isn't wasted. If you're buying a kit today, though, that mixed messaging is one more reason to just get the HK6.

VIOFO A329S 3CH

Paid links. Gearsentials may earn a commission from purchases.

VIOFO A329S 3CH (front, cabin and rear), ASIN B0FFT52P6R. Hardwire kit and memory card are sold separately.

The three wires, and the mistake that kills parking mode

Every VIOFO kit has a red, a yellow and a black wire. VIOFO's install guide says to find the right fuses with a multimeter while the ignition is off:

  1. Red (BAT) goes to a fuse that still has power with the ignition off.
  2. Yellow (ACC) goes to a fuse that's dead with the ignition off and comes alive when you start the car.
  3. Black goes to ground.

The yellow wire is the one people get wrong. It's the signal that tells the camera you parked. VIOFO says if you swap red and yellow, or put both on an always-on fuse, parking mode can't start. The camera just keeps recording like you're still driving. If your fuse box has no fuse that turns off with the ignition, VIOFO's parked-recording FAQ says a hardwire kit can't trigger parking mode in that car at all.

If fuse boxes aren't your thing, this is a fair job to hand to an installer. Fuse locations differ by car, and a test with a multimeter beats a guess.

Which parking mode to pick

The A329S offers five ways to watch a parked car. Here's the plain version of each, from VIOFO's parking mode guide and the A329S FAQ.

  • Auto event detectionrecords when it sees motion and stops when things go still. Files are locked so they won't be recorded over. VIOFO suggests low sensitivity so wind and rain don't set it off all night.
  • Time-lapse records nonstop at a few frames a second. Playback is fast and silent, and it uses less power.
  • Low bitrate records nonstop at normal speed but with smaller files. VIOFO says the quality drop is hard to see.
  • Low power impact detectionis the A329S's new mode. The camera sleeps until it feels a bump, starts recording within 2 seconds, and saves a 1-minute clip. If it sees movement during that minute, it keeps going for up to 3 minutes.
  • Hybrid parking (HK6 only) starts in time-lapse, low bitrate or event detection. When the battery drops to the voltage you pick, it falls back to low power impact detection.

The tradeoff is simple. Continuous modes catch the person who walks up, keys your door and leaves. Impact mode only wakes for a bump, so it can miss a quiet scratch, but it can watch the car for much longer on the same battery. That's why hybrid is the most useful mode on the camera: you get full recording first, and the sleepy mode takes over before the battery gets low.

One detail trips people up in event detection mode. VIOFO says the parking G-sensor only works while the camera is already recording. If nothing moved first, a bump alone won't lock a clip. Impact mode exists to cover that gap.

Set the timer and the cutoff before the first night

In parking mode the camera stops for one of two reasons: it hits the parking timer you set, or the battery hits the cutoff voltage. Whichever comes first wins. VIOFO's cutoff guide explains the switch on the kit. It has four settings for 12-volt cars, from 11.8V to 12.4V. Lower means more recording time. Higher is the safe choice, because the camera quits sooner.

With an HK6 you set a second number in the camera, called Cut-off Voltage, for hybrid mode. The FAQ says to set it a little higher than the kit's switch. That way the camera drops into impact mode first, and the kit only shuts everything off later.

If your battery ever comes up weak, VIOFO's own advice is to move the kit to the highest setting, 12.4V, and set the parking timer to about 2 hours. Then check that nothing else in the car is drawing power. An older battery, a car that sits for days, or short daily drives all leave less room, so start conservative and loosen it once you trust the setup.

The card, and other ways to power it

Parking mode writes a lot, so the card matters. The FAQ says the A329S takes microSD cards up to 512GB and recommends VIOFO's own cards. VIOFO's card guide adds that 4K cameras should use a U3 card, and that high-endurance cards made for dash cams last longer under nonstop recording.

A hardwire kit isn't the only power option, but it's the one VIOFO prefers:

  • OBD cable. VIOFO says its original OBD cable also supports parking mode. No fuse box work, but the plug usually sits low under the dashboard.
  • Dash cam battery pack.You still need the hardwire kit. VIOFO's battery pack guide warns that some other brands swap which colored wire is power and which is ACC, so check before you connect.
  • The lighter socket.Most turn off with the car, so the camera turns off too. VIOFO says using it for parking mode isn't reliable, and a socket that stays on can drain the battery.

When it won't switch to parking mode

You can tell it worked. VIOFO's status guide says the screen shows a parking icon, and cameras with voice alerts say "Parking recording started" when you turn the engine off. If that doesn't happen, VIOFO's troubleshooting page covers the three usual cases:

  • It shuts off when you park. Parking mode is set to Off in the menu, or the ACC wire isn't on a switched fuse.
  • It keeps recording like you're driving. The yellow ACC wire is on an always-on fuse. Move it.
  • It stops partway through the night. Check whether you hit the timer or the cutoff first. If neither, VIOFO suggests checking the fuse taps, trying low bitrate mode, and making sure the card is on its recommended list.

The final decision

If you're setting up a new A329S and want parking coverage, buy the HK6. It's the only way to get hybrid parking, which is the mode that gives you full recording and still protects the battery. You also get the camera-side cutoff that makes hybrid work. Those new parking modes are a big part of what the A329S adds over the older A329.

Keep an HK4 you already own if you mostly park in a garage or for short stops. Event detection, time-lapse, low bitrate and impact mode all still work, and the timer plus the kit's switch will protect the battery. You just can't chain modes together.

Skip parking mode, or keep the timer short, if the car sits for a week at a time or the battery is already tired. And if fuse boxes make you nervous, an OBD cable or a professional install is a better plan than guessing which fuse is which. Budget for the hardwire kit and a 4K-rated card on day one. The camera alone won't record a parked car.

If you're adding an HK6 and a card

Paid links. Gearsentials may earn a commission from purchases.

Best for drivers who want front, cabin and rear coverage plus hybrid parking. Plan on a separate HK6 hardwire kit and a U3 microSD card up to 512GB.

Still deciding on the camera itself? Our VIOFO A329S vs Vantrue N4 Pro S comparison covers cabin and rear coverage, plate capture, storage and what each kit includes.

Sources